SJ-ODF-48-2 Fiber Optic Distribution Frame ODF

Fiber Optic Distribution Frame/ ODF is a high-capacity, high-density fiber distribution frame, suitable composition and distribution of fibers in optical access network to achieve the fiber optic lines connection,distribution and scheduling ,the 19” rack-mounted patch panel, and fiber optic splitter can be loaded inside.

1. Adopts the international standard 19"frame, Fully-closed structure to ensure the fiber protection, and dust-proof. Electrolysis sheet/Cold-rolled steel frame, electrostatic spraying in the whole surface, nice appearance.

2. Front input and all front operation

3.Flexible installation, wall type or back type, facilitates paralleling layout and wire feeding among racks and can be installed in large groups.

4. Modular unit box with internal drawer tray integrates distribution and fusing in a tray.

5. Suitable for ribbon and non-ribbon optic fibers.

6.Suitable for inserting installation of SC,FC.ST (additional flange)adapters，easy to operate and to expand the capacity.

7. The angle between the adaptor and the connecting unit face is 30°.That not only ensures the curvature radius of fiber but also prevents the eyes from being hurt during optical transmission
8. With reliable devices for optical fiber cable stripping, storing, fixing and grounding.
9. The bending radii in any place are ensured to be more than fixing.
10. Realize the scientific management of the patch cords by using many groups of fiber unit.
11 Applies single side frontal access to enable upper or lower lead-in，and clear identify

TECHNICAL PARAMETERS：

Environmental temperature：-5℃～+60℃

Operating temperature:     -5℃～+40℃

Relative humidity:        ≤85 %( +30℃)

Atmosphere pressure:     70～106Kpa

Connectors’ loss: ≥0.5dB

Return loss: FC/PC≥40dB, FC/UPC≥50dB, and FC/APC≥60dB

Connector life span: ≥1,000 times

Insulating resistance:    ≥2000MΩ/500V

Voltage resistance strength: ＞3000V(DC)1 min non-puncture, no are-over

Specification：

Model NO.	Dimension(HxWxD)mm	Capacity
SJ-ODF-48-2	132X485X342	48 Fibers
Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement.